How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?

Build Your Own Tree House – Pros and Cons, Fasteners and Hardware

Tree houses are fun, bonding activities you can do with your friends or family, and can provide a unique and ideal hangout spot surrounded by Mother nature. One of the biggest differences in my opinion, between tree houses and other on-ground add-ons you can build on your property, is the fact that a house up in the trees sways – to varying degrees depending on the height and size of the Tree and branches – and so can add a unique and soothing feel.

There are several prerequisites that must be met before this particular project would be considered feasible for you. The first ones are also the most obvious:

  1. Do you have a suitable tree with your property on which you can construct your tree house? This question may be ambiguous to some, as what kind of tree exactly is considered suitable? Well, this depends largely on the size of the structure in question, as well as the expected load – number of people, furnishings, etc. The larger your tree house is, the larger your tree needs to be.
  2. How are you with heights? Now is not a good time to kid yourself or anyone else if you happen to be abnormally scared of heights! We're all scared of heights to varying degrees, but if you lack the courage or ability to comfortably work at the needed height, this project may not be for you. Granted, it can be built relatively low to the ground as well and still be called a "tree house" – in which case, this may not apply.

Now that we have those out of the way, we can get into the other aspects of building. When compared with a structure on the ground, a tree house may somehow seem like a simpler project due to the fact that some of us have grown up "throwing" little makeshift tree houses up here and there. However, it's important to remember that any halfway decent structure, whether on the ground or up in a tree, requires careful planning and implementation of standard safety code.

Here are some other questions you should ask yourself before concluding the planning stage:

  1. What will I use the tree house for? Depending on your answer, you may want a roof and walls, or you may find it unnecessary. In either case, a rail and / or walls at least a meter high is recommended for safety.
  2. How long do I want it to last? You may think that the answer to this question is obvious, but you should understand that the lifespan of your tree house depends heavily on the materials you use and the quality and number of layers of your protective stain. Tree houses, by virtue of their definition, stand within and under the canopy of the tree in which they are built. Because of this, they are more susceptible to premature rot due to the prolonged shade and humid nature of their environment. The fallen leaves and branches scattered across the deck also serve as decay-accelerators unless they are regularly swept off.

Foundation and Floor-shape

One of the unique beauties of a tree house is the fact that you can simply build around the various branches leaving them exposed within your tree house, enhancing the "natural" atmosphere. As with an on-ground structure, you should start with building your base and floor. You may face complications with the shape of your floor due to the limitations of suitable branches to base off of.

Because of this, there's a possibility you may have to set up for a non-square shape. This may be what you want, or this may be a problem for you. In any case, you should understand that there are some restrictions placed upon you by the particular tree you're working with. All branches used for a foundation should be able to single-handedly carry several hundred pounds, and more if you're expecting higher traffic.

Tree Wood Density and Fastener Quality

Large tree houses that weigh more than the collective weight of their occupants should be carefully designed , as various factors such as the hardness of the tree and fastener quality and design come more into play. Wood will compress where the fasteners connect to the tree to varying degrees based on the hardness of the tree in question, causing a sinking of the tree house.

Professional-grade Tree house Fasteners – Are they Necessary?

There are various tree house fasteners available on the market today specially manufactured for their unique needs. However, the question invariably arises as to how necessary these customized bolts and brackets are in comparison to normal ones found in home centers due to their price. They often cost between one and several hundred dollars each!

The first thing to bear in mind when contemplating the pros and cons of these rather pricey pieces of hardware is that trees are living organizations, and are still growing, moving, and changing shape. Therefore, your tree house and the hardware on which it is mounted must accommodate this movement. Simply bolting the beams into the tree's branches results in a fixed attachment that will force the tree to either pull the screw through the beam or try to grow around the beam.

The first of the two will result in a sudden and dangerous failure , while the second will result in an unhealthy and unnatural growth around the beam, potentially causing disease and decay to set in. Custom bolts and brackets are made with a certain allowance for tree growth, with a section of the bolt that is embedded deep in the tree's heartwood and a large shank that allows axial movement coupled with a female part that is attached to the beam.

So to answer the question of whether these expensive custom parts are necessary, the short answer is yes, and no. Yes, if you lack the know-how to find parts that will accomplish the same purpose as the professional parts do, and no, if you do, and do not require your tree house to last for fifty years. Home centers sell bolts and hardware with large diameters and lengths which can be used, but the entire shank can not be threaded.

The half or so that is embedded into the tree must be threaded, but the reminder that acts as the cushion to compensate for tree-growth must be smooth. You also need a female piece that fits around the smooth shank that has a bracket that can be screwed into your beam. This female bracket then has the freedom to slide along the axis of the smooth bolt shank as the tree grows in girth. All parts should be stainless steel as well – others may corrode to failure.

Obviously, the big tree house building companies would disagree with the above opinion, and the ideal is to buy these parts. I'm just offering an alternative for those who do not have a large budget but still want to construct a safe and environmentally-friendly tree house. There is also a chance you will not be able to find hardware that meets the criteria, leaving you with no other choice.

The professional criterion when it comes to fastening your tree house to your tree seems to be "perch, do not pin". I agree whole-heartedly with this principle and any alternative I save above should not contradict this. But not everyone looking to build a tree house is willing to spend tens of thousands of dollars, so, your budget is a primary factor in determining the quality as well as what kind you would build.

In any case, it should be a safe and fun place to accommodate whatever activities you envision. Taking into consideration the damage inflicted on the tree as well as future complications that may arrise such as those mentioned above when planning, is simply the responsible and consider course of action.

Posted in general | Comments Off on Build Your Own Tree House – Pros and Cons, Fasteners and Hardware

Automated Real Estate Software – The New Trend in Investing

The value of real estate has appreciated in the last few years. It also shows great potential for growth. Hence, now might be the best time to look at an investment in property. However, if you’ve spoken to someone who already has his knees deep in real estate investing, you will realize that a lot of things are easier said than done.

It requires skill and experience to scour the market for high value properties.

Then comes landing good buyers.

Finally, there’s a humongous amount of paper work to handle.

This is where real estate investing softwares might lend a hand. They automate the entire process of real estate investing. If you would like to know more about such applications, here’s a low down on some of the common features they offer.

Lead generation –

At the click of a single button you are able to find a comprehensive list of buyers and sellers scattered across the country. The information elicited includes names and mail addresses of buyers, owners of properties, the type of property (bank owned, foreclosed, low and high equity, absentee owner etc.) and amount of cash paid.

Website creation –

Every business needs a website, especially if you do not have a physical location from which operate. Not all of us know the technicalities of writing HTML codes and designing a website. The real estate softwares can help you create targeted and user-friendly websites that you can use to showcase your business.

Direct mail generator –

Marketing is the soul of a real estate business. The more you network the more leads you can generate. The direct mail generator feature helps you setup a highly productive and efficient mailing system. You can send out emails, newsletters, posters and flyers.

There are a range of pre-made email templates you can use to send out messages to your leads. Autoresponders make sure you can keep in touch with sellers and buyers even when you are not physically present to answer their queries.

This feature is a highlight feature of most real estate software given that the savings in time and money are large.

Investing tips –

This is a section that most newbies can benefit from. Most applications include a resource library with info on the basic aspects of the trade. An open community of members can also give you an opportunity to interact and build your resource with real-time knowledge about making, building and closing a deal.

Diverse user base –

Modern-day automated real estate investing software applications cater to a varied group of investors. It includes those who buy, fix and flip properties. If you are a landlord, it can increase the convenience of managing your properties including finding tenants and repairing and renovating properties between subsequent deals. There are also features that rehabbers and builders of new constructions can use.

Contracts and paperwork –

Real estate investment also means a lot of paperwork. Most applications offer tools to generate contracts. Features such as auto-fill enable you to fill personal details into letters, contracts and other property-related documents. You can sign them online, and then email or fax them free of charge.

There is one thing – you need to be realistic. Real estate softwares are tools you can use to streamline your business. You should have a real estate business to start with and some basic know-how on investing.

Posted in general | Comments Off on Automated Real Estate Software – The New Trend in Investing

The Role of Technology in Education

In the current age we live in, technology has become an important component. Every day there is some new gadget or software that makes lives easier and improves on the technology and software that already exists. Making lives easier is not, however, the only role technology plays in our lives.

Technology is playing an increasing role in education. As technology advances, it is used to benefit students of all ages in the learning process.

Technology used in the classroom helps students adsorb the material. For example, since some people are visual learners, projection screens linked to computers can allow students to see their notes instead of simply listening to a teacher deliver a lecture.

Software can be used to supplement class curriculum. The programs provide study questions, activities, and even tests and quizzes for a class that can help students continue learning outside the classroom.

Technology has also become part of many curriculums, even outside of computer and technology classes. Students use computers to create presentations and use the Internet to research topics for papers and essays.

Students also learn to use the technology available to them in computer and tech classes. This ensures that after graduation they will be able to use the technology in a work setting, which may put them ahead of someone who did not have access to a particular technology or software in their own school setting.

As technology advances, students have better access to educational opportunities like these. When something new and "better" is disclosed, the "older" technology becomes more affordable, allowing it to be used in educational settings, even when schools are on a tight budget.

Technology has also advanced to help children even before they've started school. Educational video games and systems for young children helps them prepare for school and in some cases get a head start on their education.

There are people who may say children are "spoiled" by technology. Instead of being able to add a long column of numbers in their heads, for example, they turn to a calculator. Regardless of these arguments, technology is an important part of today's society. By incorporating it into the classroom, students will be better equipped to transition from the classroom to the work place.

Posted in general | Comments Off on The Role of Technology in Education

Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)

Strengths and Weaknesses of Waterfall Approach for Software Development

One of the most famous and widely used approaches for software development is the waterfall model. Waterfall approach is an old technique that has been in use for quite some time, but in modern times agile approach is gaining prominence.

Waterfall approach, as is evident from the name, refers to a systematic approach where one step comes after the other. It cannot go the other way round. The process works like the waterfall effect that flows in one direction, which is from up to down.

In this process the life cycle of the development process is predetermined. All the steps are defined before the start of the project. The approach is predictive, where the team is well aware of the order of each step and therefore works accordingly. It starts from the requirement analysis, the design phase and then proceeds on to the implementation, testing and the maintenance phases.

The waterfall approach can be quite beneficial for those who are quite clear on their requirements. A planned approach works for them because they want fixed processes and budget. Where fixed processes are beneficial, at the same time they can be inconvenient at times. In cases where the client is not clear on the requirements and finds in the middle of the project that he/she wants to change course, this approach can prove to be quite problematic.

Another point of the waterfall approach is that the requirement analysis and design of architectural structure can consume a lot of time. Extensive research is done initially as the next phases depend completely on the planning strategy. However, the good thing is that everything is thoroughly worked out and each aspect is studied beforehand. The developers in such cases know what is expected of them.

A waterfall approach works in a systematic order, with one step following the other and the testing phase comes in the end. If there are any big problems encountered in the testing phase, it means a long process to make the amends. The process can consume extra time and money.

We cannot conclude that one approach is better than the other, as every method would have its own strengths and weaknesses. The determination of success for each method depends on how it is being used and whether the approach suits the scope of work being undertaken. While one approach may be suitable for a particular project, it might become totally useless under different circumstances. For example, some believe that agile methods are not well suited for offshore development, as they require a closer contact and communication that is not possible in an offshore project.

Posted in general | Comments Off on Strengths and Weaknesses of Waterfall Approach for Software Development

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

Computer Hardware Course – The Advantages of Taking It

Computer hardware courses are an excellent way to learn how to manage the inevitable computer failures that you will encounter as you find yourself hanging on your computer more and more everyday. While you do have the option of taking your computer to the service center it can cost you a lot of time and money. Your computer hardware course is invaluable for helping you understand the hardware requirements for your computer that will be enable you to jump to the rescue instead of trudging along to the repair shop.

It does not take an engineer or a technician to be successful in learning about computer hardware. If you are interested in engineering or technician positions however, a background in computer hardware can make you a far more valuable person in your field and can enhance your employability tremendously.

To troubleshoot your computer you can do very well with a simple computer hardware course. You can become your own specialist and forgo spending the money on an IT specialist.

The time invested in a computer hardware study program will pay off quickly when things go wrong. But, this is not the only reason taking a computer hardware course would be a good plan.

Not only will you be able to fix your computer, but you will have the knowledge to build a computer from scratch. The cost of computer parts is often far less expensive than buying a pre-made package. You will also be able to customize your computer so that it is perfectly designed for your needs.

By avoiding the cost of labor from the computer store you will have a far less expensive computer that is perfect for you. You will also no longer need to worry about taking your computer in for repairs as you will know just how to fix what goes wrong.

Computer knowledge is in high demand no matter what career you are involved in. With the information you learn in a computer hardware course you will be able to take on an IT position. Such positions are in high demand as a limited number of people have the knowledge to take on an IT role.

The time needed to take a computer hardware course is well worth the investment. Learning about software and programming can only make you even better with your computer goals. If you are limited in time, not to worry. Many courses are available online or on CD for you to do at home.

Take some time to discover exactly what will be covered in your course. The computer technology field is huge, so you will need to focus. You will never be able to learn everything about computer hardware in a single course. It takes a lifetime of study to learn, and with technology constantly changing you will need to continuously work on keeping your knowledge up to date. A computer hardware course will bring you a chance to get ahead of the game and keep up with your own computer.

Louis Zhang, computerhardwarecute dot com

Posted in general | Comments Off on Computer Hardware Course – The Advantages of Taking It

Introduction to Silk Test Architecture

Normal use of an application consists of a person manipulating a keyboard and mouse to initiate application operations. The person is said to be interacting with the GUI (Graphical User Interface). During Silk Test testing, Silk Test interacts with the GUI to submit operations to the application automatically.

Thus Silk Test can simulate the actions of a person who is exercising all the capabilities of an application and verifying the results of each operation. The simulated user (Silk test) is said to be driving the application. The application under test reacts to the simulated user exactly as it would react to a human rest. Silk Test consists of two distinct software components that execute in separate processes:

The Silk Test host software

The 4Test Agent software

Silk Test host software

The Silk Test host software is the program you use to develop, edit, compile, run and debug your 4Test scripts and test plans. This manual refers to the system that runs this program as the host machine or the Silk Test machine.

The Agent

The 4Test Agent is the software process that translates the commands in your 4Test scripts into GUI-specific commands. In order words, it is the Agent that actually drives and monitors the application you are testing. One Agent can run locally on the host machine. In a networked environment, any number of Agents can run on remote machines. This manual refers to the systems that run remote Agents as target machines. This manual refers to the systems that run remote Agents as target machines. In a client/server environment, Silk Test drives the client application by means of an Agent process running on each application’s machine. The application then drives the server just as it always does. Silk Test is also capable of driving the GUI belonging to a server or of directly driving a server database by running scripts that submit SQL statements to the database. These methods o directly manipulating the server application are intended to support testing in which the client application drives the server.

Posted in general | Comments Off on Introduction to Silk Test Architecture

3 Main Causes of Kernel Errors

A kernel error is a failure in some code critical to Windows. If you have ever encountered a Blue Screen of Death (BSoD), then you have seen a kernel error. Windows is actually several layers of programs made to work together. You can think of Windows as if it were your body, with many pieces working together to make a whole, and, like your body, some parts of Windows are more important than others.

The kernel is the most important part of Windows. It includes critical programs to handle things like memory management and device drivers for the graphics card. These programs are like a body's heart and brain. If something in the kernel crashes, it will often cause all of Windows to crash.

Software Failures

Because there are a lot of programs in the kernel, there are many opportunities for bugs to appear. Although Microsoft does extensive testing to get rid of bugs, their testing facilities can not run through all the combinations that billions of computers use with Windows when some bugs get through.

However, many of the kernel failures are in device drivers written by companies that make hardware, not by Microsoft. Your graphics card, for example, probably uses a driver created by the video company. These companies often work with Microsoft to test their drivers, but having companies working together adds an additional layer of complexity.

Hardware Failures

A hardware failure can cause a kernel error. If your graphics card fails, it can send bad data to the graphics device driver, which then crashes, creating a kernel error. If your hard disk fails, it can corrupt files used by Windows and cause the programs that use those files to crash.

Registry Failures

Registry failures can cause kernel errors. The registry is a database of information that Windows uses to store information about programs. If the registry gets corrupt, the programs that use it can cause kernel errors.

Registry corruption can come from either software or hardware failures. Software corruption can come from a bug in one of the programs that writes information out to the registry. Or if you turn off your computer without doing a complete shutdown, the registry files may not get completely written to the disk. Hardware corruption can happen when the hard disk fails causing parts of the registry files to be lost. It's a good idea to do some research on kernel errors and other registry issues.

Posted in general | Comments Off on 3 Main Causes of Kernel Errors